📞 929-235-1233 💬 WhatsApp 📧 Email

Frameless Shower Doors In Brooklyn

Custom frameless shower enclosures, sliding doors, fixed panels and bathtub doors in Brooklyn: measured after the tile is set, fabricated in tempered or laminated glass, installed by Alex Glass Construction crews, with hardware in chrome, brushed nickel, black or brass.

← Frameless Shower Doors

In short: Alex Glass Construction fabricates and installs frameless shower doors in Brooklyn: hinged doors, sliding doors, fixed panels and bathtub doors in 3/8 or 1/2-inch tempered glass (clear, low-iron, frosted, reeded or acid-etched), with hardware in chrome, brushed nickel, matte black or brass. We measure after the tile is set, fabricate to the opening with the clearances the hardware needs, and install in a morning. Survey and quote are free; typical lead time is one to two weeks. Call 929-235-1233 or request a free quote.

Shower doors in Brooklyn

Most Brooklyn shower work is a renovation: a brownstone bathroom in Park Slope or Clinton Hill with a tiled alcove that wants a frameless hinged door and panel, a new house in Manhattan Beach or Mill Basin with a walk-in shower and a Starphire panel, a Midwood or Borough Park family bathroom that wants a soft-close sliding door over a tub or a sliding door with black hardware. The house on Ocean Avenue has Starphire frameless showers and a steam room; 114 Lexington Avenue has frameless showers in every apartment of a new building.

Brooklyn bathrooms are small and the walls are rarely plumb, which is why we measure after the tile, at three heights, and fabricate to the opening rather than to a stock size. Glass and hardware samples are at the showroom on Staten Island, twenty minutes over the bridge.

Types we build

Neighborhoods we serve

Brownstone Brooklyn: Williamsburg, Greenpoint, Bushwick, Clinton Hill, Fort Greene, Carroll Gardens, Cobble Hill, Park Slope, Prospect Heights, Crown Heights, Bedford-Stuyvesant, Brooklyn Heights.

South Brooklyn: Flatbush, Midwood, Borough Park, Bay Ridge, Bensonhurst, Gravesend, Sheepshead Bay, Manhattan Beach, Mill Basin.

How a shower door job runs

  1. Photos and rough sizes for a budget price, or a free survey once the tile is on.
  2. Measurement after tile: width at three heights, height, plumb of both walls, the curb and ceiling, and the hardware the opening allows.
  3. Fabrication in tempered glass with the deductions for clips, hinges and clearances; usually one to two weeks.
  4. Installation in two to four hours, sealed where the hardware meets the tile; a door swings and seals the same day.

Framed and semi-frameless options are compared on framed vs frameless shower doors.

Shower projects in Brooklyn

Four-panel black aluminum sliding door wall opening onto a terrace, seen from inside a new house with a herringbone oak floor, Ocean Avenue, Brooklyn
Ocean Avenue, Brooklyn — Starphire frameless showers and a steam room in a new house
Glass balcony railings across the front of a new brick residential building at 114 Lexington Avenue, Brooklyn
114 Lexington Avenue — frameless showers throughout a new building
Frameless sliding glass shower door with black bar and rollers in a white subway-tile bathroom, Midwood, Brooklyn
Midwood — sliding shower door with black hardware
Frameless sliding glass shower door with polished bar and rollers, closed, in a tiled bathroom in Borough Park, Brooklyn
Borough Park — soft-close sliding shower door

More projects are added to the portfolio as they finish.

Questions People Ask

Who installs frameless shower doors in Brooklyn?

Alex Glass Construction fabricates and installs frameless shower doors, sliding doors, panels and bathtub doors in Brooklyn, measured after tile and installed by our own crews. Call 929-235-1233 or send photos of the shower.

How much does a frameless shower door cost?

It depends on the size, the configuration (door only, door and panel, sliding, bathtub), the glass (clear, low-iron, frosted, reeded) and the hardware finish. We quote from photos and rough sizes and confirm after the survey; the quote is free.

When do you measure for a shower door?

After the tile and the curb are finished and the plumbing fixtures are in, because the glass is cut to the finished opening to within a sixteenth of an inch.

3/8 or 1/2 inch glass?

3/8 inch is the standard for most hinged and sliding doors; 1/2 inch is heavier and stiffer, used on large panels and where the look of a thicker edge is wanted. Both are tempered safety glass.

How long does it take?

Typically one to two weeks from measurement to installation for clear tempered glass; low-iron, frosted or reeded glass can add a week. Installation takes a morning.

Do you install shower doors in Brooklyn brownstones with out-of-plumb walls?

Yes; that is most of what we do. We measure at three heights, cut the glass to the actual opening and use hinges and clips with enough adjustment to seal against a wall that leans up to about 3/8 inch.

Related

Frameless Shower Doors Sliding Shower Doors Shower Panels Shower Doors in Manhattan Brooklyn Custom Mirrors

About this page. Written by Alex GC Inc. d/b/a Alex Glass Construction and reviewed before publication by Aleksandr Chernovolenko, Managing Partner, with our design and estimating lead and a field foreman. Our foremen hold the NYC DOB Site Safety Training supervisor card and our crews the 40-hour worker card; we are certified to fabricate, install and service Alutech and Everest aluminum systems. Facts are drawn from our own projects, manufacturer test data and the applicable codes; where we are giving an opinion, we say so. Last reviewed September 2026. Credentials

Need a shower door in Brooklyn?

Send photos of the shower and rough sizes. We will quote, measure after tile, and install.