The shatter-resistant mirror we supply for gyms, dance studios and home training rooms: what it is made of, what thicknesses and sizes it comes in, when to choose it over glass, and how we lay out and install a full-height wall.
In short: A gym mirror wall is built one of two ways: 1/4-inch glass mirror with a safety backing, which gives the truest reflection and is what we install in commercial fitness centers, or acrylic mirror, which cannot shatter, weighs half as much and is the right choice where people, equipment or children will hit the wall. The acrylic mirror we supply is FABBACK, made from OPTIX continuously processed acrylic sheet, vacuum metalized to a mirror finish and sealed with an abrasion-resistant protective back coating. It comes in thicknesses from .118 inch (about 3 mm) to .220 inch (about 5.6 mm), in standard sheets and custom sizes, and we cut, edge and install it as full-height panels in gyms, dance studios, home gyms and training rooms across New York and New Jersey.
Acrylic mirror is not a mirror laid on plastic; it is a clear acrylic sheet with a reflective metal layer applied to its back under vacuum (vacuum metalizing), so you look through the clear acrylic to the reflective layer the same way you look through glass to the silver on a glass mirror. The quality of the reflection depends on the flatness and clarity of the base sheet and on how well the metal layer is protected.

| 1/4-inch glass mirror, safety-backed | FABBACK acrylic mirror | |
|---|---|---|
| Reflection | Truest; no distortion on a flat wall | Very good; slight waviness possible on large thin panels, minimized by thicker sheet and a flat substrate |
| If struck | Breaks; safety backing holds the pieces on the wall | Cracks or dents; does not shatter |
| Weight (4 by 8 panel) | About 100 lb | About 50 lb |
| Scratching | Hard surface, hard to scratch | Softer face; clean only with mild soap and a soft cloth, no ammonia or abrasive cleaners |
| Thermal movement | Negligible | Acrylic expands and contracts; panels need a small gap at edges and a flexible fixing |
| Where it belongs | Commercial gyms, studios, hotels, any staffed facility with a sound wall | Kids' gymnastics and dance, boxing and martial arts, home gyms, schools, rooms where equipment is thrown or racked against the wall, upper floors where weight matters, walls that cannot carry glass |
We install both. The glass version is covered on our mirrors page and on the Jersey City gym project; the rest of this article is about the acrylic product. For the broader case for shatterproof mirror in kids' rooms, schools and dance studios, see our earlier article.
Repairs are simpler than with glass: a damaged panel is cut free and replaced, and because of the weight, two people can handle a full-height panel on a stair or in an elevator where a glass panel would need a crew and a lift.

The maker lists FABBACK for home replacement mirrors, vehicle mirrors, showroom and display work, furniture and interior design, and we see the same requests: a closet door mirror in a child's room, a mirror on a wall that cannot take the weight of glass, display plinths and retail fixtures, mirrored furniture panels, and infinity and decorative mirror effects where the sheet is cut into shapes a glass shop would not attempt. The same cutting, polishing and fixing rules apply at any size.
To price a gym or studio wall, send the wall length and height, a photo of the wall, the floor-to-mirror height you want and whether the room is a commercial gym, a kids' or dance studio or a home gym, and we will recommend glass or acrylic, lay out the panels and quote both if you want to compare. request a quote or stop by the Staten Island showroom to see the acrylic next to glass.
An acrylic mirror sheet made from OPTIX continuously processed acrylic, vacuum metalized to a mirror finish and sealed with an abrasion-resistant protective back coating. It is shatter resistant and weighs half as much as glass mirror.
From .118 inch (about 3 mm) to .220 inch (about 5.6 mm). We use .220 for full-height gym and studio walls and the thinner sheets for small panels, furniture and display.
Yes for home gyms, kids' and dance studios, boxing and martial arts rooms and any wall that will be hit. For a staffed commercial gym with a flat, dry wall, safety-backed 1/4-inch glass gives the truest reflection and is harder to scratch.
Thin sheets on an uneven wall can show a wave. A thicker sheet (.220) on a flat, primed substrate with flexible adhesive reads flat.
Mild soap and water with a soft cloth or microfiber. No ammonia, glass cleaner with alcohol, or abrasive pads; these haze the acrylic surface.
Usually 12 to 18 inches in a weight room so equipment hits the wall below the mirror; lower in dance and kids' studios. We set it to the equipment that will be used.
Yes. It is cut and polished at our shop to the panel layout, and custom sheet sizes and thicknesses are available on order.
Yes, in gyms, studios, schools and homes across the five boroughs, Long Island and New Jersey, and we install the glass alternative as well.
Shatterproof mirror for gyms, kids' rooms and studios Mirrors and reflective glass Jersey City fitness center mirror wall Free mirror samples Gray mirror Antique mirror
About this page. Written by Alex GC Inc. d/b/a Alex Glass Construction and reviewed before publication by Aleksandr Chernovolenko, Managing Partner, with our design and estimating lead and a field foreman. Our foremen hold the NYC DOB Site Safety Training supervisor card and our crews the 40-hour worker card; we are certified to fabricate, install and service Alutech and Everest aluminum systems. Facts are drawn from our own projects, manufacturer test data and the applicable codes; where we are giving an opinion, we say so. Last reviewed November 2026. Credentials
Send the wall length and height, a photo, and how the room is used. We will lay out the panels and quote acrylic, glass or both.