📞 929-235-1233 💬 WhatsApp 📧 Email

Glass Replacement

New glass in the frame you already have. Fogged, cracked or single-pane glass in windows, doors, storefronts, skylights and railings, replaced with the same make-up or upgraded to low-E and laminated units, across New York City, Long Island and New Jersey.

← Services

In short: Glass replacement means removing the glass from a window, door, storefront or other opening and setting new glass in the existing frame, without replacing the frame itself. It is the right job when the glass has failed and the frame has not: a fogged insulated unit, a cracked or broken lite, old single-pane glass in a sound frame, or glass that no longer meets the building's needs for energy, sound, safety or privacy. We measure, order the unit to match or upgrade the make-up, and install it from inside wherever the frame allows, usually in one visit per window. The upgrade that makes the biggest difference is low-E insulated glass in place of clear or single-pane glass; the second is a laminated inner lite for street noise. What you gain, with the numbers, is in what you gain from replacing the glass, not the window. Call 929-235-1233 or request a free quote.

When glass replacement is the right call

SymptomWhat it usually isGlass-only fix?
Fog, haze or a tide line between the panesFailed edge seal on the insulated unitYes: new unit in the same frame
Crack or chip in one paneImpact or thermal stressYes: new lite or unit
Single-pane glass, cold and condensingOriginal glazing in an older frameYes if the frame's glazing pocket takes an insulated unit; otherwise a sash or window replacement
Traffic noise through a closed windowThin or monolithic glassYes: laminated or acoustic unit, if the frame depth allows
Glass near a door or floor that is not temperedOlder glazing that predates safety glazing rulesYes: tempered or laminated safety glass
Water coming in at the frameDrainage, gasket or perimeter failure, not the glassNo: see window leak inspection
Frame rotten, corroded or out of squareFrame failureNo: window replacement

The decision between glass-only and a new window on a commercial building, with the cost and disruption on each side, is covered in how we decide between glass-only and full replacement.

What we replace

New insulated glass unit set in the sill of a wood window with the glazing stop fitted, interior view
A new insulated unit set in an existing wood sash, SoHo, Manhattan. The frame, the hardware and the exterior finish are untouched.

Match it or upgrade it

A replacement unit can be an exact match of what was there, or a better one in the same thickness. The frame sets the overall thickness; within it, the make-up is open:

How the job runs

Worn glazing gasket profile removed from an aluminum storefront door during a glass replacement service call
Gaskets are replaced with the glass on storefront and door work; a new unit in a shrunk gasket leaks.
  1. Survey. We identify the frame and its glazing method (interior stops, exterior bead, wet-glazed), measure the glass and the pocket, check the thickness with a gauge, and photograph the condition. Fogged units are checked for a frame drainage problem at the same time.
  2. Quote. Per lite, with the make-up proposed as a match and, where it is worth it, as an upgrade, so the owner sees both prices.
  3. Order. Insulated units are made to size; tempered and laminated lites are cut and processed before delivery. Nothing is cut on site.
  4. Install. From inside where the frame allows (most windows and all interior-glazed storefronts), from outside or a lift where it does not. Old glass out, pocket cleaned, drainage checked, new setting blocks, new gaskets or glazing tape, unit set and sealed, stops refitted.
  5. Board-up and emergency. Broken storefront or door glass is boarded or fitted with temporary glass the same day where possible, with the permanent unit to follow.

Lead time depends on the make-up: clear tempered and standard insulated units are fastest, low-E laminated acoustic units take longer. We tell you the date at the quote, not after the order.

What to send for a quote

Glass replacement work

Divided-lite wood window in SoHo with new insulated glass and new wood glazing stops
SoHo, Manhattan — new insulated units and glazing stops in divided-lite wood windows, from inside
Cracked quarter-inch storefront glass at the bottom rail of an aluminum door in Brooklyn
Brooklyn storefront door — cracked 1/4-inch tempered glass and gaskets replaced on a service call
Soundproof interior window with two lites of laminated glass in a church in Hamilton Heights, Manhattan
1763 Amsterdam Avenue, Manhattan — laminated glass soundproof window for a church

More projects are added to the portfolio as they finish.

Questions People Ask

Can you replace just the glass in a window?

Yes. If the frame is sound, the insulated unit or lite is replaced in the existing frame, usually from inside, in one visit per window. The frame, hardware and exterior finish stay as they are.

How do I know the insulated glass has failed?

Fog, haze or a tide line between the two panes that no cleaning removes means the edge seal has failed and moisture is inside the unit. The glass is replaced; the window is not.

Can single-pane glass be replaced with insulated glass?

Often. If the frame's glazing pocket is deep enough for a 1/2-inch to 1-inch unit, yes; if not, a thin insulated unit or vacuum glass may fit, or the sash is replaced.

Can I upgrade to low-E glass when replacing?

Yes, and it is the upgrade we recommend most. The coating goes on the cavity face of the new unit and roughly halves the heat loss of clear double glazing.

Does new glass reduce noise?

A laminated inner lite in the new unit does. Standard double glazing is only a little quieter than a single pane; laminated glass adds several points of STC and is the upgrade for street and train noise.

Where is tempered glass required?

In and beside doors, within 18 inches of the floor, in bathrooms and showers, on stairs and landings, and in railings. We replace with tempered or laminated glass wherever the rules call for it.

Can storefront glass be replaced the same day?

Broken storefront glass is boarded or fitted with temporary glass the same day where possible; the permanent tempered or insulated unit follows when it is made.

Do you replace glass in windows you did not install?

Yes, in any brand or system, across the five boroughs, Long Island and New Jersey.

When is glass replacement the wrong answer?

When the frame leaks, is rotten or corroded, is out of square, or cannot take the glass the room needs. Then the frame is the problem and a window replacement is the honest recommendation.

Related

Insulated glass units Low-E glass Acoustic glass Storefront glass replacement Window replacement Storefront repair Property maintenance services

About this page. Written by Alex GC Inc. d/b/a Alex Glass Construction and reviewed before publication by Aleksandr Chernovolenko, Managing Partner, with our design and estimating lead and a field foreman. Our foremen hold the NYC DOB Site Safety Training supervisor card and our crews the 40-hour worker card; we are certified to fabricate, install and service Alutech and Everest aluminum systems. Facts are drawn from our own projects, manufacturer test data and the applicable codes; where we are giving an opinion, we say so. Last reviewed November 2026. Credentials

Fogged, cracked or single-pane glass?

Send a photo of the window or door and the problem, the size and the count. We quote a match and an upgrade, and install in the frame you have.